《500kV交流紧凑型输电线路带电作业技术导则》—英文版.docVIP

PAGE PAGE 1 ICS?FORMTEXT29.240.20 FORMTEXTF 20 FORMTEXT ? DL Electric Power Industry Standard of the People’s Republic of China DL/T 400—2019 Replace DL/T 400—2010 Technical Guide for Live Working in 500kV AC Compact Transmission Line Issue Date: June 4, 2019 Implementation Date: October 1, 2019 Issued by National Energy Administration of the People’ Issued by National Energy Administration of the People’s Republic of China PAGE PAGE 1 TOC \o 1-1 \h \u TOC \o 1-2 \h \u 24547 Table of Contents 12005 Foreword II 24214 1 Scope 1 30448 2 Normative references 1 21540 3 Terms and definitions 2 27631 4 General requirements 2 28615 5 Technical requirements 4 13893 6 Enter or leave equipotential 9 4525 7 Matters needing attention at work 10 17407 8 Test of tools 13 11231 9 Transportation and storage of tools 14 PAGE PAGE 1 Foreword This standard was drafted in accordance with the rules given in GB/T 1.1—2009 Directives for standardization—Part 1: Structure and drafting of standards. This standard is a revision of DL/T 400—2010 Technical Guide for Live Working in 500kV AC Compact Transmission Line. Compared with DL/T 400—2010, the main changes are as follows: —the scope of application has been expanded to single-circuit and double-circuit 500kV AC compact lines at an altitude of 3000m and below; —the technical requirements for working on one power-off circuit while the other circuit is live have been added. This standard was proposed by the China Electricity Council. This standard was prepared by the National Technical Committee of Standardization for Live Working (SAC/TC 36). Main drafting organizations of this standard: China Electric Power Research Institute Co., Ltd, Jinhua Power Supply Company of State Grid Zhejiang Electric Power Co., Ltd, State Grid Shandong Electric Power Company, State Grid Jiangsu Electric Power Co., Ltd, and State Grid Hubei Electric Power Co., Ltd. Main drafters of this standard: LEI Xinglie, FANG Yuqun,