ipc支架选型推荐.pdfVIP

Holder for Beckhoff Panel PC and Control Panel Holder for Beckhoff Panel PC and Control Panel  Beckhoff gives three opportunities to present and hold the Control Panel and Panel PCs  1. C9900-M337 – stand for mounting arm adapter  2. C9900-Z317 – Panel holder  3. C9900-Z324 – Panel presenter C9900-M337 │Stand  mounting arm adapter for Rittal and Rolec mounting arm systems with 48 mm tube  for a permanent installation, four additional M6 x 9 mm threads are available  anodized aluminum matches the elegant design of the Beckhoff Panel PCs and Control Panel  for the comfortable use at the desk C9900-M337 │Stand  The stand is suitable with following Beckhoff Panel PCs and Control Panel:  CP32xx-00x0 with C9900-M184  CP37xx-00x0 with C9900-M184  CP39xx-00x0 with C9900-M751 or C9900-M753  CP72xx-00xx-00x0 with C9900- M161 or C9900-M163 C9900-Z317 │Panel holder  Panel holder is suitable for panels without mounting arm adapter  Safe stand  Can be used with many key extensions  Optimized for big panel  Low weight C9900-Z324 │Panel Presenter  Foldable presenter for Panel PCs and Control Panel  Transportable  Easy to stow  Simple handling  Plates are made of anodized aluminum  Dimensions approximately: 290 x 25 mm x 210 ( W x H x D) C9900-Z324 │Panel Presenter  Can be used with many key extensions  Cutouts for cables located on the backside  Sides can’t be moved when the holder is in place C9900-Z324 │Panel Presenter  The holder suits Beckhoff Panel PCs and Control Panel from 11 up to 24 inch.  Preferred for CP2xxx and CP3xxx, with exception of some CP22xx and CP37xx types  Elderly Panel PCs and Control Panel generations are not all compatible e.g.:  CP79x3  CP6xxx  C33xxx  C36xxx Pic