熔体微分静电纺丝原理及设备.ppt

PP Processing Using MD-ESP Experimental Prototype of MD-ESP TPU Processing Using MD-ESP 3.Melt Differential Electro-spinning 道法自然！ 熔体微分静电纺丝 实验装置及纺丝过程 装置: Experimental Prototype of MD-ESP & the electro-spinning process Melt Differential Process based on 3 technical points: 1) Multi-runner to nozzles, 2) Melt differential spinning by electrical force on the edge of cone surface. 3)This process also can be enhanced by hot gas. Split-flow on the runner of Injection Moulding Machine Second Split-flow on Inner Connical Surface of the Nozzle Hot gas has a Thinning Effect on the Melt + Assisted by Hot gas Inner Connical Surface 3.Melt Differential Electro-spinning 熔体微分过程：多喷嘴多级分流，电场力熔体微分，热气体辅助纺丝 实验: Electric force relay by Special Electric Field Coupling Tech. The stretch process of fiber is enhanced. fiber was stretched again 3.Melt Differential Electro-spinning 多级电场接力，拉伸过程强化 实验: 3.Melt Differential Electro-spinning 射流间距与纺丝效率 实验: 3.Melt Differential Electro-spinning 熔体粘度与纺丝效率 实验: The reduction in polymer melts viscosity is effective to elevating spinning efficiency in some extent, but when lar 3.Melt Differential Electro-spinning 多个熔体微分喷头的情况 实验: Microphotograph of MD-ESP Fibers Microphotograph of S-ESP Fibers MD-ESP S-ESP 3.Melt Differential Electro-spinning 熔体微分静电纺丝 溶液静电纺丝 结果&讨论: 采用熔体微分成功制得与溶液电纺丝相当的纤维。 By means of MD–ESP, fiber diameter as small as S-ESP by Prof. Reneker. 熔体微分静电纺丝 溶液静电纺丝 190 nm 3.Melt Differential Electro-spinning Microphotograph of MD-ESP Fibers Microphotograph of S-ESP Fibers 结果&讨论: 采用熔体微分电纺丝纤维没有溶剂挥发造成的孔洞。 By means of MD-ESP, there is no holes on the fiber caused by solvent evaporation. MD-ESP S-ESP * Research Background Progress in Melt Electro-spinning Melt Differential Electro-spinning Research Results and Application Outline Research Progress in Polymer Melt Electro-spinning 1）We solved the 2 bottle neck problems of Melt Electro-spinning by Melt Differential method, and have applied more than 20 patents around this