填石路基施工工艺【高等级公路填石路基现场施工工艺分析及应用】.docVIP

填石路基施工工艺【高等级公路填石路基现场施工工艺分析及应用】 　　The rockfill subgrade of high grade highway construction site process analysis and applied 　　XiaoQian 　　(highway bridge construction in changsha city, hunan province, a limited liability company, 410007) 　　Pick to: the paper first analyzes the rockfill graded control and paving stone material craft, and combined with the engineering practice of high grade highway subgrade construction technology of the rockfill analysis for building the rural highway lay a good foundation technology. 　　Key words: the rockfill subgrade; The construction technology; Application research 　　For a long time, because mountain building roads level is low, the highway departments to fill in the stone roadbed construction technology research is less. With the development of economy, high grade highway construction from the center of the coastal area has the mountains extended city authors, is going to build a large stone roadbed fill. Domestic to fill in the stone roadbed later start, building technology has not mature. Combining with the project examples, the rockfill subgrade of high grade highway construction process are analyzed, and the building of the mountainous area highway lay a good foundation technology. 　　1 fill in the stone graded control 　　In the excavation rock packing, through the test select the best blasting parameters, make critical pile of packing with particle size of roadbed filling materials requirements. In the packing shipment, pour materials, spreading process, pay attention to the packing degree even collocation, prevent packing segregation. 　　(1) the non-uniform coefficient 　　For the Lord of the rock embankment fill packing, the non-uniform coefficient should be 10 ~ 40; Used for basement, road bed, structures and backfilling slope, non-uniform coefficient is appropriate for more than 10 above; The curvature coefficients rock packing should be in 1 ~ 3 range. 　　(2) water stone fill subgrade construction of packing gradat