雅马哈r6发动机使用手册翻译中英文.pdfVIP

04YZF-R6 SSKITMAN1AL The Performance Edge for excellent riders 2003 YZF-R6 Kit Manual Please note: • Please understand that these parts are not covered by the warranty. • The manufacturer does not take any responsibility for problems caused by these parts. • These kit parts are intended exclusively for racing purposes. You are strictly requested not to use them for use on public roads. • The specifications and usage methods of these kit parts along with the contents of this manual are subject to change without notice for improvement. • This manual has been written for persons having knowledge and experience in the field of motorcycles. Please refer to the service manual for information on part assembly and maintenance. 1 .Standard Specifications (SS spec.) Item Spec Engine type Liquid-cooled, 4-stroke, In-Line DOHC 4-valve Displacement 599.7 cc Bore x stroke 65.5 mm x 44.5 mm Compression ratio 12.4 - 13.0 : 1 Valve timing (event angle) =105° =110° Intake Exhaust Squish height 0.60 mm (minimum) Minimum valve x piston =0.75 mm (minimum), 10° after exhaust clearance Intake Exhaust top dead center =1.75 mm (minimum), 11° before exhaust top dead center Valve (tappet) clearance =0.20 ±0.03 mm =0.30 ±0.03 mm Intake Exhaust Throttle body 38EIS MIKUNI minimum bore = 37.5 mm, throttle bore = 38.0 mm Exhaust system 4-2-1 system, #1 -2, #3-4 exhaust pipe