- 3
- 0
- 约11.82万字
- 约 49页
- 2020-12-18 发布于黑龙江
- 举报
Miconic TX-GC2 INVENTIO AG
Commissioning Acceptance Tests
K 604528 E / 01
1-11.220 COMMISSIONING ACCEPTANCE TESTS
Summary This document specifies the procedures for acceptance tests which have to be
performed according to EN81-1: 1998 or ASME A17.1-2000 before putting the
elevator into operation.
Authorization: Authored Reviewed Released
Lead Office: PD3 EB3 EB3
Name: Peter Klemm Teofilo Ferreira Roger Beuret
Date: 16.06.2004 16.06.2004 16.06.2004
Modification: 01
KA No. 160120
KA Date: 18.06.2004
Restrictions This Manual is the property of INVENTIO AG and shall only be used by SCHINDLER personnel or authorized SCHINDLER
agents for purposes which are in the interest of SCHINDLER. This design and information is our intellectual property. Without
written consent, it must neither be copied in any manner, nor used for manufacturing, nor communicated to third parties.
Application for such consent should be addressed to: INVENTIO AG, Postfach, CH-6052 Hergiswil NW
Page 1 - 49
Miconic TX-GC2
您可能关注的文档
- FI 310 SGC01 02和AMC01 02 制动楔块的连接件和安装托架.pdf
- FI 371_ 对重_ 对重安全钳 G11 S.pdf
- FI415 执行确认 安全钳传动装置.doc
- FISC-009 GED双向安全钳现场安装指导Ae1 20060418.doc
- FISC-010 GED双向安全钳现场安装注意事项.doc
- K601191C_02_GK1、GK1-W、GK2安全钳的保养.pdf
- K602651C_迅达公司安全钳的保养.pdf
- K602656C_01_G01安全钳制动距离表.pdf
- K602657C_01_G11安全钳制动距离表.pdf
- K602658C_01_G21_G211安全钳制动距离表.pdf
原创力文档

文档评论(0)