ABAQUS在计算基坑开挖变形中的应用研究.pdfVIP

ABAQUS ABAQUS elnp ′K0 K0 ABAQUS ABAQUS ABAQUS TU47 A 2012)S0008205 (1979 ) E-mail: huilaiqin@163.com Application of ABAQUS in calculating deformation of excavations 1 2, 3 4 5 QIN Hui-lai , ZHANG Jia-feng , GUO Yuan-cheng , LI Feng (1. Technical Center, China State Construction Engineering Corporation, Beijing 101300, China; 2. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China; 3. China Airport Construction Group Corporation of CAAC, Beijing 100101, China; 4. Civil Engineering School, Zhengzhou University, Zhengzhou 450002, China; 5. China Construction Second Engineering Bureau Ltd., Beijing 100054, China) Abstract: The physical meanings of the parameters for the porous elasticity model and the critical state plasticity model in ABAQUS, a popular commercial finite element software, are discussed, and the methods to decide the parametric values from triaxial compression tests or oedometer tests are presented. Based on the relationship among the normal consolidation line, unloading-reloading line, K consolidation line and the critical state line of elnp ′ curves and the modified Cam-clay model, 0 the correlation between the initial void ratio and the mean effective stress in the field is deduced and used in the simulation by ABAQUS. A soil-nailing case is simulated in ABAQUS by means of the porous elasticity model and the critical state plasticity model. The deformation results of this soil nailing case are analyzed, and the rationality is verified by the monitoring data in practice.