汽车制动器调节齿板精冲模设计.pdfVIP

目 录 I II 摘 要 精冲是冲压中一种比较先进的金属加工方法，它在汽车、航天等领域正在发挥越 来越重要的作用。随着工业技术的发展，精冲的作用会在更多领域得到广泛应用。 本说明书通过对汽车制动器调节齿板工艺的正确分析，在查阅了大量相关资料后， 设计了一套精密冲压模具。本文从工艺分析开始对整个设计过程进行了详尽的介绍， 叙述了模具成型零件的设计与加工工艺过程，主要零件的工艺参数的选择与计算，压 力中心的计算，精冲压力机的选择等。本设计中对模具的结构进行了一定的改良和创 新，使之更易操作和维修，在不影响工件质量的前提下，降低了生产成本。有利于精 冲模具的普及和发展。 关键词：汽车制动器调节齿板；精冲；模具设计 Abstract The fine flushing which is widely applied in the automotive and aerial industries is a new machining method .Whose principle was presented in this paper .The brake adjustment toothed rack mold of an automobile was designed with some refinement and originality that offered an ease of use and maintenance and a decrease in cost with the same precision . This paper also elaborated the entire design process including structure design and process design . This instruction booklet through to the automobile brake adjustment toothed rack craft correct analysis, after has consulted the massive correlation data, has designed set of precise ramming molds. This article started from the craft analysis to the entire design process to carry on the exhaustive introduction, narrated the mold to take shape the components design and the processing technological process, the important components craft parameter choice and the computation, The selection of the process parameter and the press as well as some relative calculations such as the pressure center, was also performed. In this design has carried on the certain improvement and the innovation to the mold structure, causes it to be easier to operate and the service, in does not affect the work piece quality