ibmts7610硬盘更换手册.docx

IBM TS7610 硬盘更换手册 作者 审核 分类 IBM 子类 TS7610 更新时间 2015-09-21 关键字 IBM TS7610硬盘更换手册 摘要 IBM TS7610硬盘更换手册 主要适 用环境 IBM TS7610 TS7620  目录 ，概述 亠，概述 The TS7610 or TS7620 server is equipped with 12 Serial Advaneed Technology Attachment (SATA) hard disk drives (HDDs), on the front of the server. Drives 0 - 11 store your repository meta-a nd customer data. If of an HDD failure, the MegaRAID con troller automatically redistributes the stored data from the failed HDD to drive 11, which is used as a hot spare. Importa nt: The follow ing figure shows the HDDs n umberi ng seque nee. You must maintain the original numbering order. Rearranging the order in which the drives were orig in ally in stalled results in data loss. Figure 1. HDD n umberi ng seque nee? OB62WK:*::*:: Figure 1. HDD n umberi ng seque nee ? OB 6 2 WK:*::*:: Importa nt: HDDs are exter nal and hot-swappable. Before you beg in, review the in formatio n in TS7610 Applia nee Express and TS7620 Applia nee Express Electrostatic discharge procedures . ? Always replace a failed hard disk drive with the exact man ufacturer , model, and capacity; as the one that you removed. ? Be sure to in stall the new hard disk drive into the same bay that was previously occupied by the failed hard disk drive. Do not rearrange the original order of the drives. ? Each HDD is en closed in a drive carrier . There is no n eed to remove the drive from the carrier to replace the drive. ? Slot 12 contains the Hot Spare for the array. If you replace a failed Hot Spare drive with a drive that contains any previous information or data, you are prompted to format that drive. If prompted, an swer: Yes. Tip: You can access instructional videos for removing and replacing an HDD in the Failed disk drive Resoluti on guide and the Miss ing disk drive Resoluti on guide, which is in the ProtecTIER? Man ager. For in structi ons on access ing the guides, see Finding TS7610 Applia nee Express and TS7620 Applia nee Express ProtecTIER V3.3.6 in formati on 二，更换步骤 B