嵌入式系统基础 项目七：通用GPIO编程 按键程序S3C6410ADDR.H.docx

嵌入式系统基础延伸阅读 嵌入式系统基础 按键程序S3C6410ADDR.H #ifndef __S3C6410ADDR_H__ #define __S3C6410ADDR_H__ #ifdef __cplusplus extern C { #endif // System Controller #define SYSCON_BASE (0x7E00F000) #define rMEM_SYS_CFG (*(volatile unsigned *)(SYSCON_BASE+0x120)) // GPIO #define GPIO_BASE (0x7F008000) #define rGPACON (*(volatile unsigned *)(GPIO_BASE+0x00)) #define rGPADAT (*(volatile unsigned *)(GPIO_BASE+0x04)) #define rGPAPUD (*(volatile unsigned *)(GPIO_BASE+0x08)) #define rGPBCON (*(volatile unsigned *)(GPIO_BASE+0x20)) #define rGPBDAT (*(volatile unsigned *)(GPIO_BASE+0x24)) #define rGPBPUD (*(volatile unsigned *)(GPIO_BASE+0x28)) #define rGPNCON (*(volatile unsigned *)(GPIO_BASE+0x830)) #define rGPNDAT (*(volatile unsigned *)(GPIO_BASE+0x834)) #define rGPNPUD (*(volatile unsigned *)(GPIO_BASE+0x838)) // NAND Flash Controller #define NANDF_BASE (0 #define rNFCONF (*(volatile unsigned *)(NANDF_BASE+0x00)) //NAND Flash configuration #define rNFCONT (*(volatile unsigned *)(NANDF_BASE+0x04)) //NAND Flash control #define rNFCMD (*(volatile unsigned *)(NANDF_BASE+0x08)) //NAND Flash command #define rNFADDR (*(volatile unsigned *)(NANDF_BASE+0x0C)) //NAND Flash address #define rNFDATA (*(volatile unsigned *)(NANDF_BASE+0x10)) //NAND Flash data #define rNFDATA8 (*(volatile unsigned char *)(NANDF_BASE+0x10)) //NAND Flash data (byte) #define rNFDATA32 (*(volatile unsigned *)(NANDF_BASE+0x10)) //NAND Flash data (word) #define NFDATA (NANDF_BASE+0x10) #define rNFMECCD0 (*(volatile unsigned *)(NANDF_BASE+0x14)) //NAND Flash ECC for Main #define rNFMECCD1 (*(volatile unsigned *)(NANDF_BASE+0x18)) //NAND Flash ECC for Main #define rNFSECCD (*(volatile unsigned *)(NANDF_BASE+0x1C)) //NAND Flash ECC for Spare Area #define rNFSBLK (*(volatile unsigned *)(NANDF_BASE+0x2