嵌入式系统基础 项目七：通用GPIO编程 GPIO实训 四灯闪烁程序.docx

嵌入式系统基础延伸阅读 嵌入式系统基础 GPIO实训 AREA Init,CODE,READONLY GPKCON0 EQU 0x7F008800 GPKCON1 EQU 0x7F008804 GPKDAT EQU 0x7F008808 GPKUP EQU 0x7F00880C ENTRY ResetEntry ldr r0,=GPKCON0 ;寄存器地址付给寄存器R0 ldr r1,=0;立即数放入寄存器中 [23-20] str r1,[r0];r1中数据存放寄存器中 LDR R0,=GPKUP LDR R1,=0XFFFF ;P334 STR R1,[R0] LDR R2,=GPKDAT LEDLOOP LDR R1,=0XF0 ; STR R1,[R2] ;输出高电平，灯灭 BL DELAY LDR R1,=0x0 STR R1,[R2] BL DELAY B LEDLOOP DELAY ;延时子程序 LDR R3,=0xbbffff DELAY1 SUB R3,R3,#1 CMP R3,#0X0 BNE DELAY1 MOV PC,LR END