嵌入式系统基础 项目七：通用GPIO编程 LED程序.docx

嵌入式系统基础延伸阅读 嵌入式系统基础 LED程序 #include stdio.h #include stdarg.h /*定义与GPK端口相关的各寄存器的地址*/ #define rGPKCON0 (*(volatile unsigned *)(0x7F008800)) #define rGPKCON1 (*(volatile unsigned *)(0x7F008804)) #define rGPKDAT (*(volatile unsigned *)(0x7F008808)) #define rGPKPUD (*(volatile unsigned *)(0x7F00880C)) #define LED1_ON() rGPKDAT = (rGPKDAT ~(0xf4)) | ((0X7 0xf)4); #define LED2_ON() (rGPKDAT=0Xb0) #define LED3_ON() (rGPKDAT=0Xd0) #define LED4_ON() (rGPKDAT=0Xe0) #define LED1_OFF() (rGPKDAT|=0X10) #define LED2_OFF() (rGPKDAT|=0X20) #define LED3_OFF() (rGPKDAT|=0X40) #define LED4_OFF() (rGPKDAT|=0X80) static void Delay(void) //非精确延时函数 { volatile unsigned int k; for(k = 0; k k++); } int main(void) { rGPKCON0 = (rGPKCON0 ~(0xffffU16))|(0x1111U16); //GPK7~4设为输出 rGPKPUD = (rGPKPUD ~(0xffU 8))|(0x00U8); //GPK7~4 while(1) { rGPKDAT = (rGPKDAT ~(0xf4)) | ((0X7 0xf)4); Delay(); rGPKDAT = (rGPKDAT ~(0xf4)) | ((0XB 0xf)4); Delay(); rGPKDAT = (rGPKDAT ~(0xf4)) | ((0XD 0xf)4); Delay(); rGPKDAT = (rGPKDAT ~(0xf4)) | ((0XE 0xf)4); Delay(); } return 0; }