嵌入式系统基础 项目五：ARM C语言程序设计基础 程序识别.docx

嵌入式系统基础延伸阅读 嵌入式系统基础 程序 #include stdio.h #include swi.h //包含用户自定义文件 unsigned *swi_vec = (unsigned *)0x08;//SWI中断向量地址 extern void SWI_handler(void);//调用中断处理子程序,ahandle.s中 //用来从中断向量地址跳转到中断处理程序中 unsigned Install_hander( unsigned routine, unsigned *vector ) { unsigned vec,old_vec; vec=(routine-(unsigned)vector-8)2; if(vec0xff000000) { printf(handler greater than 32MBytes from vector);测试范围 } vec=0xea000000|vec; old_vec=*vector;//存储地址 *vector=vec; return(old_vec); } int main(void) { int result1,result2; struct four_results res_3; Insulter_handler((unsigned) SWI_handler,swi_vec );//装载中断处理程序 printf(result1=multiply_two(2,4)=%d\n,result1=multiply_two(2,4));//函数调用并输出 printf(result2=multiply_two(3,6)=%d\n,result2=multiply_two(3,6)); printf(add_multiply_two(2,4,3,6)=%d\n,add_multiply_two(2,4,3,6)); res_3=many_operations(12,4,3,1); printf(many_operations result:\n); printf(res_3.a=%d\n,res_3.a); printf(res_3.b=%d\n,res_3.b); printf(res_3.c=%d\n,res_3.c); printf(res_3.d=%d\n,res_3.d); return 0; }