c语言编写的万年历 有平年闰年 有闹钟功能.docxVIP

#includereg52.h #includelcd1602.h #includeds1302.h #includeds18b20.h #define uint unsigned int #define uchar unsigned char uint b[6]; //年月日时分秒 uchar code row1[]={2009-01-01}; uchar code row2[]={00:00:00}; uchar year1[12]={31,28,31,30,31,30,31,31,30,31,30,31};//平年 uchar year2[12]={31,29,31,30,31,30,31,31,30,31,30,31};//润年 uchar j[6]={0x85,0x88,0x8b,0x84+0x40,0x87+0x40,0x8a+0x40};//LCD地址 uchar i,k,jj=0,w,clock=0,bigclock=0,c=0,num; //i循环数 k温度缓存 jj地址位 uint temp; sbit b1=P3^0;//设置 sbit b2=P3^1;//上调 sbit b3=P3^2;//下调 sbit b4=P3^3;//转换 sbit b5=P3^4;//闹钟 sbit speaker=P3^5; lcdscan() { for(i=0;i6;i++) { lcdwrite(j[i]); lcdshuju(a[11-i*2]+0x30); lcdwrite(j[i]+0x01); lcdshuju(a[10-i*2]+0x30); } } void key() { if(b1==0) { dsaddshuju(0x80,(a[1]4)+a[0]+0x80); while(b1==0) { for(i=0;i6;i++) { b[i]=a[11-i*2+clock]*10+a[10-i*2+clock]; } if(b4==0) { delay(3); jj++; if(jj==6) { jj=0; } } if(b2==0) { delay(3); b[jj]++; if(b[5]==60)b[5]=0; if(b[4]==60)b[4]=0; if(b[3]==24)b[3]=0; if((b[0]%4==0 b[0]%100!=0) || b[0]%400==0){if(b[2]year2[b[1]-1])b[2]=1;} else {if(b[2]year1[b[1]-1])b[2]=1;} if(b[1]==13)b[1]=1; if(b[0]==100)b[0]=0; } if(b3==0) { delay(3); b[jj]--; if(b[5]==-1)b[5]=59; if(b[4]==-1)b[4]=59; if(b[3]==-1)b[3]=23; if((b[0]%4==0 b[0]%100!=0) || b[0]%400==0){if(b[2]=0)b[2]=year2[b[1]-1];} else {if(b[2]=0)b[2]=year1[b[1]-1];} if(b[1]==0)b[1]=12; if(b[0]==-1)b[0]=99; } for(i=0;i6;i++) { a[11-i*2+clock]=b[i]/10; a[10-i*2+clock]=b[i]%10; } lcdwrite(j[jj]); lcdshuju(0); lcdwrite(j[jj]+1); lcdshuju(0); delay(200); lcdwrite(j[jj]); lcdshuju(a[11-2*jj+clock]+0x30); lcdwrite(j[jj]+1); lcdshuju(a[10-2*jj+clock]+0x30); delay(200); if(b1==1) { dsaddshuju(0x80,(a[1]4)+a[0]); dson(); } if(b5==0)clock=12; } } } void main() { speaker=0; lcdrw=0; dson(); lcdon