遥控窗帘电路的设计资料.pdf

摘要 本文设计了一种基于 AT89C52 单片机的红外窗帘控制器，系统分为两个部 分，一是红外遥控器部分，分别设置了启动 / 停止、打开、关闭、速度减小、速 度增加和自动 6 个按键，当不同的按键被按下时红外发射二极管便发出不同的按 键编码。二是接收控制器部分， 其功能是用单片机通过一体化红外接收头接收遥 控器发出的编码并进行解调，然后根据编码的功能来控制步进电机的运行状态。 系统包括手动和自动两种模式， 在手动模式下可通过按键来控制窗帘的打开， 关 闭或停止。在自动模式下可根据室内光线的强度自动控制窗帘的打开或关闭。 从 而实现手动和自动控制窗帘的目的。 关键词：单片机；红外；遥控；窗帘 Abstract This design is an infrared curtain controller based on the STC89C52 single chip micro computer. The system can be divided into two parts. The first part is the IR remote control which sets the 6 buttons of start/stop, open, close, slow down, speed up and automatic. The infrared emitting diode will send different code when different button is pressed. The second part is the receiving controller which would make use of the single chip micro computer to receive the code sent by the remote control through the integrated infrared receiver and make demodulation. Then it would control the running situation of the stepping motor according to the functions of the code. The system includes two kinds of models manual and automatic. Under the manual model, you can make the curtain be opened, closed or stopped by pressing the buttons. Under the automatic model,opening or closing the curtain can be controlled automatically according to the intensity of the indoor light. In this way, the curtain can be controlled manually and automatically. Key words: Single chip micro computer； infrared；remote control；curtain 目录 第 1 章 绪论 1 1.1 遥控窗帘国内外发展现状 1 1.2 遥控窗帘的优势与特点 2 第 2 章 单片机的介绍 4 2.1 单片机简介 4 2.2 单片机的特点 4 2.3 单片机的应用 5 2.4 单片机 AT89C52的结构原理 5 第 3 章 系统