nj501运动控制用户手册英文版.pdf

Machine Automation Controller NJ-series CPU Unit Motion Control User’s Manual NJ501-1300 NJ501-1400 NJ501-1500 CPU Unit W507-E1-01  OMRON, 2011 . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. No patent liability is assumed with respect to the u f the information contained herein. Moreover, becau MRON is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the u f the information contained in this publication. Introduction Introduction Thank you for purchasing an NJ-series CPU Unit. This manual contains information that is necessary to use the Motion Control Function Module of an NJ-series CPU Unit. Please read this manual and make sure you understand the functionality and per- formance of the NJ-series CPU Unit before you attempt to use it in a control system. Keep this manual in a safe place where it will be ailable for reference during operation. Intended Audience This manual is intended for the following personnel, who must also h e knowledge of electrical sys- tems (an electrical engineer or the equivalent). •