小儿手足口病的护理论文.doc

长沙民政职业技术学院毕业设计说明书 题目：火化机自动骨灰收集装置中骨灰粉碎 装置设计 类型:产品设计 类型: 产品设计 工艺设计 方案设计 V 学生姓名： 学 a . 学 院： 殡仪学院 专 业： 现代殡仪技术与管理 班 级： 学校指导教师： 企业指导教师: 二零一六年五月一日 摘要 此设计主要是捡灰炉自动收灰中的粉碎部分设计，此装置主要有机架、碾碎轮、链轮、 链条、减速器、电动机等零部件构成。在设计吋，考虑到节约成本，方便实用等各方面的因 素,在减速器的选择时，选用了孔输入，轴输出的形式，这样既节约了联轴器等零件节约了成 本，也省去了安装等问题。 此装置的设计是受到破碎机，粉碎机的工作原理的启发。它的工作原理是：通过涡轮蜗 杆减速器连接电动机和一个主动链轮，并减速。主动轮带动从动链轮，从动链轮又与碾碎轮 齿连接，带动碾碎轮齿运转。破碎机、粉碎机也可也碾碎骨灰，但是由于二者转速都很高， 造成骨灰难以收集，粉碎装置此设计就是想办法，应用了蜗轮蜗杆减速器和链传动动的二次 减速达到很低的转速。 通过粉碎理论的支持，骨灰特质材料的研究，成功设计出捡灰炉自动收灰装置中粉碎部 分的方案设计。 关键词:粉碎；捡灰炉；粉碎装置;减速器 关键词: 粉碎；捡灰炉；粉碎装置; 减速器 Abstract This design is the high?end cremation ash automatic income crushing part of the design, the device main frame, ground wheels, sprockets, chains, reducer, motor and other components composition. In the design, taking into account the cost savings, convenience and practicality of various factors in the selection of the gear unit, the selection of the input hole, form the output shaft, which saves the cost savings and other parts of the coupling, but also eliminates installation and other issues. Design of this device is subject to the crusher, mill works inspired. Its working principle is: an electric motor and a drive sprocket connected through worm reducer, and deceleration. Driving wheel drive driven sprocket, driven sprocket tooth in turn connected with crushed, milled tooth drive operation. Crushers, shredders can be also crushed the ashes, but because both are high speed, resulting in difficult to collect the ashes, pulverizing apparatus of this design is to find ways to use the worm gear and chain drive move the secondary deceleration achieve very low speed. By supporting smash theory, study the characteristics of the material of the ashes, successfully designed to pick up close gray ash furnace automatic grinding device design section. Keywords: grinding, high-grade cremation machine; crushing equipment; reducer ■■■/, —a— 刖弓 此次毕业设计是在学校老师指导意见下修改并开题，并根据在学校的高档火化机现场以 及师傅的交流中收集的相关数据和资料进行设计的。我设计的是自动收灰装置中骨灰粉碎装 置机械和电气部分，骨灰粉碎机是