海事大学优秀毕业设计3000摘要.pdfVIP

仪征煤码头扩建工程设计 专业：港口航道与海岸工程 班级： 082 姓名：赵玉同 指导教师：蒋建平 摘 要：本设计对仪征化纤长江港区扩容改造工程进行了初步规划与设计，主要内 容包括：自然、营运条件的分析，码头总平面布置，码头断面设计，码头纵横梁 配筋计算，码头整体结构验算和码头区域的部分流场分析等。该设计依据相关规 范确定了高桩码头各部件的尺寸、高程，码头陆域、水域的主要尺度以及装卸工 艺等；使用易工软件计算了面板、纵横梁的内力并分别进行了配筋计算；利用 ABAQUS 有限元分析软件对码头整体结构进行了建模，着重分析了码头结构内力 以及桩土间的相互作用；通过 Fluent 流体力学软件对码头区域流场进行简单分析， 重点研究了双桩绕流引起的流场扰动对其后桩基的影响。 码头结构的 ABAQUS 模 型分析结果显示高桩码头结构的内力主要集中于桩基，且桩土间的相互作用明显 影响范围大概在 4 倍桩径范围内， 体现了一定的群桩效应。 Fluent 流场分析结果显 示双桩基间流速加大，影响范围在桩基后 5m左右的范围内。 关键词 ：高桩码头；总平面布置；断面设计；配筋； ABAQUS ；Fluent Abstract：The design of the Yangtze River port of Yizheng Chemical Fiber High-Piled Wharf expansion renovation project are planning and preliminary design. On the whole, the following are included: the analysis of the operation and nature condition, disposal of the wharf plane, the design of section plane for the wharf, vertical and horizontal beam reinforcement calculation, the check of the Wharf structure, the analysis of the shunt field around the port and so on. The design determine the sizes of all parts of the piled wharf, elevation, the main measure about the ground-launched waters of the wharf and the handling technology, etc based on the related standard; the internal force and reinforcement are calculated about the panel and the vertical and horizontal beam by the Yigong software; Using the ABAQUS finite element analysis software, this paper analyzed the internal force of the quay structure and the interaction between the pile and the soil; the simple analysis through the Fluent fluid mechanics software of the flow field around the dock area, especially he flow field around the double pile are also included. The ABAQUS model shows that the internal force redistribution of the high pile wharf structure are focus on pile foundation, and the obvious influence of the the interaction bet