树莓派与DHT11温湿度传感器.docxVIP

树莓派与DHT11测温度湿度（附图）? 原器件DHT11注意正反面连接方法vcc接3.3v或者5VDout接GPIO1NC不接GND接地创建脚本mydht11.c?////mydht11.c//#include wiringPi.h#include stdio.h#include stdlib.h typedef unsigned char uint8;typedef unsigned int uint16;typedef unsigned long uint32; #define HIGH_TIME 32 int pinNumber =1; //use gpio1 to read datauint32 databuf; uint8 readSensorData(void){uint8 crc;uint8 i; pinMode(pinNumber,OUTPUT); // set mode to outputdigitalWrite(pinNumber, 0); // output a high leveldelay(25);digitalWrite(pinNumber, 1); // output a low levelpinMode(pinNumber, INPUT); // set mode to inputpullUpDnCont