机械制造基础06金属冲压Rolling of Metals.pptVIP

Sheet-Metal Forming Processes 板料冲压 Sheet-Metal Parts 冲压零件 (a) (b) Figure 16.1 Examples of sheet-metal parts. (a) Die-formed and cut stamped parts. (b) Parts produced by spinning. Source: (a) Courtesy of Aphase II, Inc. (b) Courtesy of Hialeah Metal Spinning, Inc. Introduction 1、Principle and types of sheet-metal forming： sheet-metal is sheared or formed via dies.由冲压模具完成分离或成形工序 when sheet thickness is less than 8mm，it is usually performed at room temperature.常在室温进行 Low-carbon steel is the most commonly used material, for aircraft and aerospace applications aluminum and titanium are