ARM学习经验 UART串口无法正确输出字符.docxVIP

UART 串口无法正确输出字符 使用.s文件进行初始化设置，程序代码如下: ; Standard definitions of Mode bits and Interrupt (I F) flags in PSRs Mode_USR EQU 0x10 Mode_FIQ EQU 0x11 Mode_IRQ EQU 0x12 Mode_SVC EQU 0x13 Mode_ABT EQU 0x17 Mode_UND EQU 0x1B Mode_SYS EQU 0x1F I_Bit EQU 0x80 F_Bit EQU 0x40 ; when I bit is set, IRQ is disabled ; when F bit is set, FIQ is disabled UND_Stack_Size EQU 0SVC_Stack_Size EQU 0ABT_Stack_Size EQU 0FIQ_Stack_Size EQU 0IRQ_Stack_Size EQU 0USR_Stack_Size EQU 0ISR_Stack_Size EQU (UND_Stack_Size + SVC_Stack_Size + ABT_Stack_Size + \ FIQ_Stac