- 90
- 0
- 约2.88万字
- 约 41页
- 2021-04-02 发布于山西
- 举报
4 -
4 -
PAGE
1 -
水质监测数据传输网络设计
摘 要:随着电子技术的不断进步,新概念的不断提出,人们对于生活的要求也在不断的提高,智能化自动化的概念也逐渐的深入人心。伴随着生命之源的不断消耗,人们对于淡水资源的关注度也在提高。本课题就是以智能检测为主题进行设计的一款集检测、监测于一体的水质在线监测系统。本系统能够实时监测温湿度、水位、浑浊度值,并可以通过无线模块传输此时的监测值。用户采用手机APP即可查看此时检测的数据,非常方便。系统的硬件设计包括STM32系统处理器电路、温湿度传感器模块、水位监测模块、WIFI模块、浑浊度监测模块设计;软件设计主要包括系统主程序、温湿度采集程序、WIFI传输子子程序。最终通过实测表明系统设计达到设计要求,所有功能均实现。
关键词:STM32;WIFI;温湿度;水位;浑浊度
Water quality monitoring data transmission network design
Abstract:With the continuous progress of electronic technology, new concepts are constantly put forward, peoples requirements for life are also constantly improving, the concept of intelligent automation is also gradually deeply rooted in peoples minds. Along with the continuous consumption of the source of life, peoples attention to freshwater resources is also increasing. This subject is an online water quality monitoring system with intelligent detection as the theme. The system can monitor temperature and humidity, water level and turbidity in real time, and can transmit the monitoring value through wireless module. The user can check the detected data by using the mobile APP, which is very convenient. The hardware design of the system includes STM32 system processor circuit, temperature and humidity sensor module, water level monitoring module, WIFI module and turbidity monitoring module. The software design mainly includes the main program of the system, temperature and humidity acquisition program, WIFI transmission sub-subroutine. Finally, the test shows that the system design meets the design requirements and all the functions are realized.
Key words: STM32; WIFI; Temperature and humidity; The water level; turbidity
目 录
TOC \o 1-3 \h \z \u
1 绪 论 - 5 -
1.1 设计背景 - 5 -
1.2 设计现况和意义 - 6 -
1.3 本文主要内容 - 6 -
2 系统的方案设计 - 7 -
2.1 系统主要模块 - 7 -
2.2 系统结构 - 7 -
3 系统的硬件设计 - 9 -
3.1 主处理器系统电路 - 9 -
3.2 温湿度模块 - 9 -
3.3 水位监测模块 - 10 -
3.4 浑浊度检测模块 - 10 -
3.5 Wifi模块接口 - 11 -
4 系统的软件设计 - 13 -
4.1
原创力文档

文档评论(0)