icem_cfd_cfx流体学习集锦cfx_icemcfd_11_培训教程_2008_04 cfx11_04_bc.pptVIP

1/25/05 ANSYS, Inc. Propietary CFX-PreBoundary Conditions Lecture 4 Boundary Condition Types How to Create a Boundary Condition …as shown earlier. Defining a Boundary ConditionBasic Settings Boundary Type Inlet, Outlet, Opening, Wall, Symmetry Location select from composite regions in drop down menu or from all 2D primitives by clicking Coord Frame if more than one exists, select the appropriate frame Frame Type available only in a rotating domain. Allows you to specify quantities based on a rotating or stationary (absolute) frame of reference. Profile Boundary Conditions Discussed in upcoming slides Defining a Boundary ConditionBoundary Details Boundary ConditionsSpecifying Well Posed Boundary Conditions Boundary ConditionsSpecifying Well Posed Boundary Conditions Example 1 Boundary ConditionsSpecifying Well Posed Boundary Conditions Example 2 Boundary ConditionsSpecifying Well Posed Boundary Conditions Do not set boundary conditions that over-specify or under specify the problem Over Specifying Not giving the solver the freedom to approach the correct answer ? Difficulty converging Under Specifying Not giving the solver enough information to calculate values ? Non physical solution Boundary ConditionsSpecifying Well Posed Boundary Conditions Example Boundary ConditionsSpecifying Well Posed Boundary Conditions Example Boundary ConditionsSpecifying Well Posed Boundary Conditions Example Boundary ConditionsSpecifying Well Posed Boundary Conditions Example Boundary ConditionsSpecifying Well Posed Boundary Conditions Recommended Configurations Most Robust: Velocity/Mass Flow at an Inlet; Static Pressure at an Outlet. The Inlet total pressure is an implicit result of the prediction. ? Robust: Total Pressure at an Inlet; Velocity/Mass Flow at an Outlet. The static pressure at the Outlet and the velocity at the Inlet are part of the solution. ? Sensitive to Initial Guess: Total Pressure at an Inlet; Static Pressure at an Outlet. The system mass flow i