imatest-SFRplus_INI_Reference最新分析和总结.pdf

/docs/sfrplus-ini-reference/ SFRplus INI Reference SFRplus ini file reference Since SFRplus is included in IT EXE and DLL, users may sometimes need to examine or edit the INI file used to control IT versions. Most of the settings in the [sfrplus] section are set by one of the three SFRplus Settings windows that can be opened when SFRplus is run in Rescharts (or by clicking SFRplus setup in the Imatest main window). A few are set by responses to other windows or user actions. Settings that affect only Rescharts mode (and hence do not affect SFRplus Auto or the IT versions) will be highlighted in pink. When Rescharts SFRplus is opened, typically by pressing SFRplus setup, the main SFRplus settings window is opened. SFRplus settings window (also ? in table) Two additional windows can be called from the SFRplus settings window. You can toggle between them or return to the settings window. SFRplus More settings window (also ? in table) SFRplus Auto mode settings window ( ? in table). Settings in this window only affect SFRplus Auto (or IT EXE/DLL) runs. They do not affect Rescharts (interactive) runs. INI file settings that affect several modules are described in Imatest INI Reference . Notes (-IT) Not used in Imatest IT (gr) Affects graphics (figures). May not be of interest for Imatest IT, where graphics is often suppressed (by setting disable_figs = 1 in the [api] section). (index) Setting is equal to the index of the popup menu. You ’ll need to open the Settings window to see these: Never used for important IT settings. (index- Setting is equal to the index of the popup menu – 1 (0 – 1) compatibility for some settings that were ori