毕业设计（论文）-矿井提升机盘式制动器系统设计.docx

PAGE \* ROMAN PAGE \* ROMANII 矿井提升机盘式制动器系统设计 摘要 矿井提升机是矿业生产中非常重要的设备，其运行的可靠性和稳定性很大程度上取决于制动系统的性能。本文针对 2JK-2.5×1.2 型矿井提升机，对其制动系统进行了设计。液压盘式制动器作为一种矿业生产中常用的制动器， 具有制动速度快、制动灵敏度高、体积相对较小，制动性能优越等优点。本文选用后腔式结构的盘式制动器，对其机械结构和参数进行了设计。之后根据制动器所需的功能，设计相应的液压系统，对液压系统里的各个元件进行选型和参数计算。并根据国家新规，在液压系统里增添冗余的回油通路。然后进行液压站的设计，对油箱进行设计计算、设计油路板孔道的铺设方案、选择泵组的安装方式，并对各个液压元件进行总成。最后，对制动闸和液压系统进行仿真，通过对五个制动过程仿真实验数据表的分析，验证液压系统和液压原理的有效性和可靠性。 该论文有图 26 幅，表 19 个，参考文献 25 篇。 关键词：矿井提升机；盘式制动器；液压系统；液压站；液压仿真 全套图纸加扣 3346389411或3012250582 PAGE \* ROMAN PAGE \* ROMANII Abstract Mine hoist is a very important equipment in mining industry. Its reliability and stability depend on the performance of the braking system.In this paper, the braking system of 2jk-2.5 ×1.2 mine hoist is designed.As a kind of brake commonly used in mining industry, hydraulic disc brake has the advantages of fast braking speed, high braking sensitivity, relatively small volume and superior braking performance.In this paper, a disc brake with a rear cavity structure is selected and its mechanical structure and parameters are designed.Then according to the function required by the brake, design the corresponding hydraulic system, the hydraulic system of each component selection and parameter calculation.And according to the new national regulations, in the hydraulic system to add redundant oil return access.Then carries on the hydraulic station design, carries on the design calculation to the oil tank, designs the oil path plate hole laying scheme, selects the pump group installation way, and carries on the assembly to each hydraulic element.Finally, the brake and hydraulic system are simulated, and the effectiveness and reliability of the hydraulic system and hydraulic principle are verified through the analysis of five brake process simulation data sheets. There are 26 pictures, 19 tables and 25 references in this paper. Key words: mine hoist; Disc brake; Hydraulic system; Hydraulic station; The hydraulic simulation PAGE \* ROMAN PAGE \* ROMA