GF-546手动球阀标签-使用说明书.pdf

GF Piping Systems GF Ball Valve- Labelling Instructions for labelling Table of Contents 1 Introduction 2 2 Creating a printing template 3 2.1 Creating a printing template with text and images 3 2.2 Creating a printing template for a standard 5 3 Printing the template on the printing sheets 6 3.1 Recommended printer settings 7 3.2 Inserting printing sheets into the printer 7 4 Install the label in the ball valve 8 GF Ball Valve Labelling – User manual Introduction 1 Introduction This user manual provides guidance for the GF Ball Valve labelling system. With the GF Ball Valve system you can easily identify your ball valves within your piping system with clear labelling. The operation and maintenance can thus be made faster and more secure. The Ball Valve labelling system from GF includes several templates which are all available to download for quick and easy labelling. The template is based on Microsoft Office Word. Therefore, all degrees of freedom and functionality from Microsoft Office Word are available. Requirements for GF Ball Valve labelling: • Microsoft Office Word 2010 or higher • Word-Templates with Macros-enabled to the corresponding dimension • Laser Printer • Perforated printing sheets • Transparent handle clips You can order the appropriate material as follows: Printing-Template for Microsoft Office Word Download under /546, or contact your local sales company. Transparent handle clips Delivered depending on the dimension in packs of 10 or 5 Dimension [inch] Dimension [DN] Code Quantity ⅜” - ½” DN10/15 198 807 221 10 pc’s ¾” – 1” DN20/25 198 807 222 10 pc’s 1 ¼” – 1 ½” DN32/40