SULZER苏尔寿不锈钢轻型污水泵ABS Coronada_250_TDS系列技术数据表.pdf

Light Drainage Pump Type ABS Coronada 250 Plug-in, stainless steel submersible pump, for the removal of Type tested and monitored wastewater containing solids up to 10 mm. Application The Coronada has been designed for fixed or transportable installation, and for internal or external applications such as emptying containers and drainage pits, draining of swimming pools or flooded cellars, and removal of nuisance water from gullies or pedestrian underpasses. Construction • Fully flood-proof, pressure-tight encapsulated unit with stainless steel outer jacket and screen, motor housing, shaft and impeller. • Coronada SX version is designed for aggressive wastewater and features a high-grade stainless steel shaft, viton seals and PVC cable. • Coronada KS version is fitted with a KS float switch for automatic level control. • Single-phase, 50 Hz, 2-pole motor; insulation class F; protection type IP 68. Motor is dynamically balanced with stainless steel shaft. Thermal sensors in the stator switch off the pump in the case of overheating and automatically switch it back on after cooling down. • The stainless steel rotor shaft is supported in lubricated-for-life ball bearings. Features • Shaft sealing is by means of a lip seal (motor side) and • Corrosion-resistant stainless steel housing and hydraulics. mechanical seal (medium side). • Built-in checkvalve in the discharge outlet blocks return-flow • Discharge outlet with internal thread, built-in checkvalve, and from the discharge