设计说明书 数字功率因数变送器的设计与实现.pdfVIP

论 文 摘 要 摘要：在对传统功率的因数测量方法分析的基础 上，提出了电力 统中功率因数的基本算法：即基于 工频量功率因数的求取方法。传统测量的方法没有很 好的考虑 统不对称性而造成谐波以及非周期的分量 对功率因数的测量的准确性的影响，测量的精度不 够。如果采用单片机为控制核心来测量交流量，可以 大大提高精确度和可靠性，也会使测试设备的体积变 小，重量减轻。 本文介绍的是利用8051 单片机进行电机功率因数 测量的方法，具有硬件简单、测量快速、实现方便的 特点。 ：单片机 单相电路 MSC-51 功率因数 检测 I Abstract Intelligent power factor control device consists mainly of power factor and power factor control measure of a kind of electronic products. CeLiangBu group should include the voltage and current signal extraction, filtering, plastic and the phase information of extraction, processing, display circuit, mainly use voltage, current transformer, the comparator, flip flop, 51 devices such as control core, Control section is mainly composed of resistance and inductance and capacitance four series and parallel into GLC multiples of capacitance 8421 circuit and 51 core control components. Digital circuit should be refreshed and range data clew etc. Function. Measurement part can measure the grid of power factor and displayed in the digital control part of the tube, is through the use of the power button for regulating needs, and then based on single chip numerical algorithm of software will need conduction of capacitance and the size of the relay to the corresponding GLC circuits and capacitance value corresponding capacitance by conduction. To control requirements. Key words: coder,encoder,flip latch,counter,multivibrator II 目录 I AbstractII 1 1 1.1 课题来源1