优秀毕业论文吉他效果器的研究与设计.docx

吉他效果器的研究与设计 摘要 随着科技的不断进步，效果器引入了微处理器技术和数字咅频处理技术，与传统效果 器相比，新型效果器以其智能化、个性化、高保真等优点迅速应用到各种声音设备屮，深 受广大咅乐爱好者的青睐。 本文介绍了基于TI TMS320VC5501 DSP的吉他效果器的设计。文章主要从硬件和软 件两个方面进行分析、设计与实现。在硬件方面,主要对DSP、CODEC.单片机等芯片的 连接电路、模拟信号的处理电路以及人机交互电路进行了详细的分析；在软件方面，主要 对各种芯片的初始化和系统的工作流程进行了分析与设计，与此同时，本设计还详细介绍 了颤咅、延迟、震咅、合唱、镶边、移相等几种常用的效果算法。经实验证明，本效果器 实现的数字效果良好。 关键词：吉他效果器DSP CODEC单片机算法 The Design And Research of Guitar Effect Processor ABSTRACT With the development of technology, the Microprocessor Unit (MPU) and digital audio processing technology are introduced into the effecto匚 Compared with the traditional effector, the new type of effector is quickly applied to various sound equipments with its intelligence, individuation, and hi-fi advantages, and it also take the fancy of the music lovers. This thesis introduces a design of guitar effect processor which is based on TI TMS320VC5501 DSP. Hardware and software systems are separately introduced in this paper. For the hardware, the thesis mainly makes a detailed discussion of some hardware function models ,which including the interface circuits of DSP、CODEC MCU and etc, analog signal processing circuits, and humamachine interaction circuits. For the software, the thesis introduces the initialization of all kinds of chips and the workflow of system. At the same time, this design also introduces the several common effect algorithm in detail , such as vibrato、 delay、 tremolo chorus flanger phase. The experiment proves that the digital effects of the effector based on the above system are well. Key words: Guitar Effect Processor DSP CODEC MCU Algorithm 摘要 TOC \o 1-5 \h \z \o Current Document ABSTRACT I 1 绪论 0 \o Current Document 1.1论文研究背景 0 \o Current Document 1.2国内外研究现状 0 \o Current Document 1.3论文主要内容 1 2系统总设计 2 \o Current Document 2.1系统要求 2 \o Current Document 2.2系统方案的确定 2 \o Current Document 2.3芯片选型 3 \o Current Document 231 DSP 选型 3 \o Current Document 2.3.2单片机选型 4 \o Current Document 233 CODEC 选型 4 \o Current Document SDRAM 选型