扬州大学水利学院本科毕业设计水闸模板.docxVIP

扬州大学本科生毕业设计 扬州大学本科生毕业设计 A A 摘要 本闸位于江苏省高邮市某中型灌区干渠渠首，为渠首取水水工建筑物。建筑物等级 为一级。计算得本工程设3孔，每孔净宽5.0m,闸底板长17m，闸底板厚1.0程采用平 面钢闸门，釆用QPQ?12.5的单吊点卷扬式启闭机。经计算设计消力池长为15m,深1.0, 消力池底板厚为0.5m,海漫长为20皿。上下游翼墙结构形式釆用钢筋混凝土扶壁式挡 土墙。 本工程中防渗计算釆用改进阻力系数法，底板内力按弹性地基梁法计算。本工程设 计主要由水力设计、消能防冲设计、闸基渗流计算、闸室结构布置、闸室稳定计算、闸 室结构计算、两岸连接建筑物布置、两岸连接建筑物结构计算等几个部分组成。 关键词：水力计算稳定计算结构计算边荷载弹性地基梁 扬州大学本科生毕业设计 扬州大学本科生毕业设计 扬州大学本科生毕业设计 扬州大学本科生毕业设计 B B B B Abstract This floodgate located at Jiangsu Province Gaoyou some medium iiTigation area main channel canal head, takes the water hydraulic engineering stracture for the canal head. The building rank is first-level. Calculates this project to suppose 3, each extends 5.0m only, floodgate ledger wall long 17m, floor or bottom of sluice gate thickness of slab 1.0m. This project uses the plane steel strobe, uses QPQ-12.5 Shan Disodium to hoist the type gate. After the computation design toe basin length is 15m, deep is Im, the toe basin bottom thickness of slab is 0.5m, and the sea long is 21m. The upstream and downstream wing wall structural style uses the reinforced concrete buttress type bulkhead. In this project the anti-seepage computation uses the improvement resistance method of conelates, tlie ledger wall androgenic force according to elastically the foundation beam law computation, the this engineering design mainly by the water power design, disappears can against flush the design, the floodgate base transfiision computation, the brake chamber structural anangement, the brake chamber stable computation, the brake chamber structure computation, both banks connection building aiTangement, both banks connection building structure computation and so on several parts to be composed. Key word: Water power computation stable computation stmctuie computation load elastically foundation beam 扬州大学本科生毕业设计 扬州大学本科生毕业设计 扬州大学本科生毕业设计 扬州大学本科生毕业设计 目录 TOC \o 1-5 \h \z \o Current Document .综合说明 1 \o Current Document 1.1工程概况 1 \o Current Document 1.2水文 1 \o Current Document 1.3工程地质资料 1