电线电缆培训资料.pptxVIP

UL 62美标电线标准培训讲义UL 62Flexible cords and Cable 制作人：刘凯芜湖弋江区高新技术产业开发区2017.2.21UL 62美标电线标准培训讲义 Contents/内容A.Scope/范围B.Definitions and Units of Measurement/ 定义与测量单位C.General Construction Requirements/总的结构 - conductor (tests involved)/导体 - insulation (tests involved)/绝缘体 - covering/遮盖物 - jacket (tests involved)/外被 - finished cords (tests involved)成缆 - Markings/印字D.Q AUL 62美标电线标准培训讲义 A.Scope/范围电压: 600V max温度: 60, 75, 90, to 105 C Max电流: Proper size and type corresponding to its appropriate ratings is to be selected for usedin conjunction with applicable end-use Product standards.(18AWG 10A;16AWG 13A;14AWG 15A;12AWG 20A)UL 62美标电线标准培训讲义 本标准涵盖了各种可绕曲软线,电梯线和起卸用线，但不包括铠装电缆及电压超过600V的电线电缆也不包括加装各种端线接头的电线电缆。UL 62美标电线标准培训讲义B.Definitions and Units of Measurement 定义与测量单位Service Cords – ( e.g. SPT-2, SJT, ST, - -)耐用线Elevator Cables – ( e.g. E, EO, ETT, ETP)升降机电线Heater Cords – ( e.g. HPN, HPD, HSJ, HSJO)耐热线Range and Dryer Cords – ( e.g. SRD, SRDE)Decorative Lighting Cords – ( e.g. XTW, CXTW)Tinsel Cords – ( e.g. TPT, TST)Special Use Cords – ( e.g. C, PD)Vacuum-cleaner Cords – ( e.g. SV, SVO, SVT)Hoistway Cables – ( No Type Designation )UL 62美标电线标准培训讲义常见术语:命名—利用前后缀区分1.E在第一位:电梯线2.E位于第一个字母后:绝缘是热朔性弹性体(TPE)例如SE SEO3.H: 加热线 例如 HPN4.NI :Non-intergral当使用在平行线中就如:NISPT-I,表明绝缘和外被 分开的5.P: 平行线 例如 SPT-1 SPT-2 SPT-36.S: 用于超负荷设备和手持式器具,工具,其机械适用性等级最高 例如 S T7.SJ: 用于重负荷设备和手持式器具,工具,其机械适用性等级中等 例如 SJT8.SV用于轻型设备和手持式器具,工具,其机械适用性等级最低 例如 SVT UL 62美标电线标准培训讲义9.T: 在第一个字母的后面,热塑性材料绝缘.例如 ST10.O:耐油, 一个”o”表示外被是耐油;两个O说明外被和绝缘 都是耐油的,例如SVTOO,SJTOO,STOO11.-1: 平行绝缘最薄 -2:次薄,比-1厚 -3: 最厚12: XTW: 圣诞灯串用的平行线13: CXTW: 圣诞灯串用的绞合线或者单支线14: W: 最后一个字母为W说明是抗潮和抗紫外线的.UL 62美标电线标准培训讲义测量单位Mil – unit of length equal to 1/1000 of an inch (0.0254 mm). (1mm= 39.37 mils) (Strand Diameter, Insulation/Jacket Thick.)Circular Mil (cmil) (CM) – A unit of area equal to the area of a circle whose diameter is 1 mil (0.001 inch, 0.0254mm). Used chiefly in specifying cross-sectional areas of round conductors.The area of a circle in circular mils isequal to th