《NICE900同步机距离控制调试手册-英文》.pdfVIP

NICE900 Synchronous Motor Distance Control Mode Preface The NICE900 series integrated door machine product is a variable controller specialized for driving the door machine systems such as elevator doors, cold storage doors, and subway doors. It integrates the door open/close logic control and motor drive, and implements control on the entire door system with door open/close commands from the external system. The NICE900 can drive the AC asynchronous motor and permanent synchronous motor (PMSM), and supports two control modes, namely, speed control and distance control. Applicable to various applications, it can meet drive and control requirements of most door systems. The NICE900 Integrated Door Machine Controller User Manual is refined according to different user comments and application modes. This document describes only the application scheme of the synchronous motor in distance control mode. If you have any questions, please call us. [!] The commissioning, maintenance, or check on the controller must be performed by qualified persons under the guidance of this document. Otherwise, unexpected danger may occur and cause human injuries and device damages. [Note] This document is applicable to the door machine controller in version 1.07 or later. 1 NICE900 Synchronous Motor Distance Control Mode ★The door machine controller has been commissioned according to the following steps before delivery. It can perform door open or close operations after you correctly connect the cables. [Note] To ensure successfully commissioning of the door machine controller, perform the operations according to the following steps: 2 NICE900 Synchronous Motor Distance Control Mode Check peripheral wires C