《NICE900门机一体化控制器用户手册》-英文.pdfVIP

User Guide NICE900 Series Integrated Door Operator Controller User Guide A02 Data code Preface Preface Thank you for purchasing the NICE900 series integrated door machine controller. The NICE900 series integrated door machine controller (shorted as the NICE900 or the controller hereinafter) is a variable frequency controller specialized for driving the door machine system such as elevator door, cold storage door, and subway door. It integrates door open/close logic control and motor drive, and implements control on the entire door system with door open/close commands from the external system. The NICE900 can drive the AC asynchronous motor and permanent synchronous motor (PMSM), and supports two control modes, speed control and distance control. Applicable to various applications, it can meet drive and control requirements of most door systems. This manual describes correct use of the NICE900, including product features, safety information and precautions, installation, parameter setting, commissioning, and troubleshooting. Read and understand the manual before using the product, and keep it carefully for reference to future maintenance. Notes • The drawings in the manual are sometimes shown without cover or protective guard. Remember to install the cover or protective guard as specified first, and then perform operations in accordance with the instructions. • The drawings in the manual are shown for description only and may not match the product that you have purchased. • The instructions are subje