活性炭msds最新分析和总结.pdfVIP

Material Safety Data Sheet Section 1 - Chemical Product MSDS Name: Adsorber LXZ-3G Section 2 - Composition, Information on Ingredients CAS# Chemical Name Percent Hazardous 112926-00-8 Silica, amorphous, precipitated 100.0 No Section 3 - Hazards Identification Potential Health Effects Eye: Dust may cause mechanical irritation. Skin: Dust may cause mechanical irritation. Ingestion: May cause irritation of the digestive tract. Inhalation: Dust is irritating to the respiratory tract. Section 4 - First Aid Measures Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Get medical aid. Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Ingestion: Treat symptomatically and supportively. Get medical aid. Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: None Antidote: None reported Section 5 - Firefighting Measures General Information: Material will not burn. Use extinguishing media appropriate to the surrounding fire. Extinguishing Media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Autoignition Temperature: Not available. Flash Point: Not available. NFPA Rating: Not published. Explosion Limits, Lower: Not available. Upper: Not available. Section 6 - Accidental Release Measures General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up ma