1万吨自来水厂详细设计方案说明_毕业论文.docVIP

扬州大学环境科学与工程学院 计设毕业 计 设 毕 专 业 给水排水工秤 班级 学生姓名 完 成 日 期 200年86 月 II 日 指 导 教 师 评阅 人 扬州大学毕业设计 摘要 本设计为江苏省苏州市浦庄镇 二期扩建工程设计。该工程水鱼目标，预计水厂的总规模为I* I伊m3/d. 整个工 程包括三大部分： 取水工程 、 输配 水工程和净水工程． 取水工程主要的设计内容为地表取水位 置的选择、取水型式的确定及取水泵站的设计。 净水工程的主要设计内容为净水厂的设计计算。包括水处理工艺流程的确定、处理构筑物的设计计算以及水厂的平面和高程布置． 通过技术和经济比较，确定净水厂的工艺流程选用方案一： 平宁 方案一： 太湖水一f 酝一 级泵房- 聚合铝  网格絮凝斜 一 无阀滤池- 无阀滤池- 洁水池一酝二泵房- 城市管网 管沉淀池 关键词： 取水 工程： 输配 水工程： 净 水工程； 网格絮凝池 ： 斜管沉淀池： 无阀 滤池； Abstra ct The design is water supply project for the water plant of PuZhuang to,vn of SuZhou City in Jiangsu Province. The total volume of this project is IO thousand cubic meters. The whole project consists of three part which is water diversion project, water transport and allocation project and water treatment project The surface water diversion project consists of the selection of water source location, the forrn of water diversion and the design of pump station. The water clarification project is the major part in this paper. It consists of the choice of the water plant location, processes selectio n, water tTeatment co nstructions design, plant layout and architectural design. This paper also demonstrates the detail of process of design for each constn1ction or apparatus in the water treatment plant. It is divided into t\vo parts water treatment plant designing and water proportioning plant designing. According to the surveying about quality of raw water, the raw water can be transmitted to the user only through simple disinfection (add chlorine) Two sets of program have been compared both technologically and economically. And the first program is preferred. Tl1e whole process is as follows: raw water pipe-shaped mixing apparatus mechanical stirring clarifier water treatment project-+ flocculent tank non-valve filter clear wen high-service pumping station municipal pipe network. KeYo r d s: water diversion projects; water transport and allocation projects; water treallnent project;flocculent tank;slanting canal preciplitank; non-valve fil