计算机辅助飞机设计CATIA平台使用讲义.pptxVIP

;第一章 CATIA简介;第一章 CATIA简介;第一章 CATIA简介;第一章 CATIA简介;;;第一章 CATIA简介;第一章 CATIA简介;第一章 CATIA简介;;第二章 工作界面与基本操作;第二章 工作界面与基本操作;;;;第二章 工作界面与基本操作;第二章 工作界面与基本操作;第二章 工作界面与基本操作;第二章 工作界面与基本操作;第二章 工作界面与基本操作;第二章 工作界面与基本操作;第三章 草图设计;第三章 草图设计;第三章 草图设计;;第三章 草图设计;第三章 草图设计;第三章 草图设计;四、草图绘制;第三章 草图设计;第三章 草图设计;第三章 草图设计;第四章 零件的三维建模;;;;;;;;;;DRESS UP FEATURES;第五章　部件装配;There is a number of ways to enter ASSEMBLY DESIGN mode. Any ONE way will do it.;Assembling your individual parts into one assembly is very simple and user friendly in Catia. The first thing to do is gather up your parts. Here we have a simple plate with a hole in the middle.;We are going to take this one inch diameter rod and insert it through the hole in our plate using the ASSEMBLY DESIGN features. Ensure that you have saved your parts to a convenient location for quick access later.;;This is your PRODUCT STRUCTURE toolbar. It is how you will bring in your parts you have made and saved. Single click “Product” in your specification tree, and then click INSERT COMPONENT. From here you can instead click NEW PART and draw one as needed. Other options are also here self-evident by their names.;Here is the first part brought in using Insert Component. It’s existence is reflected in the specification tree. Now we will bring in the next part the same way.;Both parts are now in the Assembly environment, and both are reflected in the tree. They enter the environment in approximately the same orientation that they were saved. You can now move and orient them the way you wish. Catia will help you here.;This is your CONSTRAINTS toolbar for use in assemblies. They are also named in a self-explanatory manner. COINCIDENCE and CONTACT constraints will be used most.;The first skill you will want to learn here is how to manually move parts around relative to one another. Pick the face of the Plate and prepare to move it.;Grab the COMPASS from the top right corner of your screen. Put your c