数控铣削内螺纹.pptxVIP

数控铣削内螺纹;为什么要采用数控铣削的方法加工螺纹;;为什么要采用数控铣削的方法加工螺纹;如何实现数控铣削螺纹;零件;如何实现数控铣削螺纹;Z_;如何实现数控铣削螺纹;;;如何实现数控铣削螺纹;G17 G02 I-#5 Z#8 F_;;;;;如何实现数控铣削螺纹;为什么要采用数控铣削的方法加工螺纹;;第一次加工余量为0.512，粗加工, 第二次加工余量为0.20，半精加工, 第三次加工余量为0.10，精加工。;;螺纹加工程序：（FANUC系统）;螺纹加工主程序：（FANUC系统）;螺纹加工主程序：（FANUC系统）;螺纹加工主程序：（FANUC系统）;单刃螺纹铣刀;螺纹加工主程序：（FANUC系统）;宏程序: O6602; N10 #5= #1 - #3; N20 G00 X#5; N30 Z[#8+1]; N40 G01 Z#8 F200; N50 WHILE [#8 GT #2] DO1; N60 #8=#8 - #11; N70 G02 I-#5 Z#8 F400; N80 END 1; N90 G01 X[#5-3]; N100 G00 Z30; N110 M99; %;宏程序: O6602; N10 #5= #1 - #3; N20 G00 X#5; N30 Z[#8+1]; N40 G01 Z#8 F200; N50 WHILE [#8 GT #2] DO1; N60 #8=#8 - #11; N70 G02 I-#5 Z#8 F400; N80 END 1; N90 G01 X[#5-3]; N100 G00 Z30; N110 M99; %;宏程序: O6602; N10 #5= #1 - #3; N20 G00 X#5; N30 Z[#8+1]; N40 G01 Z#8 F200; N50 WHILE [#8 GT #2] DO1; N60 #8=#8 - #11; N70 G02 I-#5 Z#8 F400; N80 END 1; N90 G01 X[#5-3]; N100 G00 Z30; N110 M99; %;;;如何实现数控铣削螺纹;谢 谢！;9、春去春又回，新桃换旧符。在那桃花盛开的地方，在这醉人芬芳的季节，愿你生活像春天一样阳光，心情像桃花一样美丽，日子像桃子一样甜蜜。7月-217月-21Sunday, July 18, 2021 10、人的志向通常和他们的能力成正比例。04:29:1104:29:1104:297/18/2021 4:29:11 AM 11、夫学须志也，才须学也，非学无以广才，非志无以成学。7月-2104:29:1104:29Jul-2118-Jul-21 12、越是无能的人，越喜欢挑剔别人的错儿。04:29:1104:29:1104:29Sunday, July 18, 2021 13、志不立，天下无可成之事。7月-217月-2104:29:1104:29:11July 18, 2021 14、Thank you very much for taking me with you on that splendid outing to London. It was the first time that I had seen the Tower or any of the other famous sights. If Id gone alone, I couldnt have seen nearly as much, because I wouldnt