基于单片机的心率测试仪.docx

城建学院本科毕业设计〔论文〕摘妥 城建学院本科毕业设计〔论文〕摘妥 可 可修编. 城建学院本科毕业设计〔论文〕摘妥 城建学院本科毕业设计〔论文〕摘妥 可 可修编. 摘要 随着生物医学工程技术的开展，医学信号测■仪器日新月异。生物医学測? 与临床医学和保健医疗的联系日益严密。通过对人体各种生理信号的检测，能更 好的认识人体的生命现象。脉象包含丰富的人体安康状况信息，脉诊技术应客观 化、定■化。本设计利用光电式传感器，设计脉搏信号获取的方法。本设计主要 是基于单片机的便携式脉搏测试仪的具体实现方法，利用光电传感器产生脉冲信 号，经过放大整形后，输入单片机进展相应的控制，从而測■出一分钟的脉搏跳 动次数，快捷方便。通过观测脉搏信号，可以对人体的安康进展检査，通常被用 于保健中心和医院。本设计所设计的基于单片机的便携式心率测试仪对推进脉诊 技术客观化的实现其有积极的促进作用。本设计以单片机为核心，由脉搏检测传 感器采集脉搏信号。经过前■放大电路、濾波电路、螯形电路后得到与脉搏相关 的脉冲信号。该脉冲信号作为中断信号交由单片机进展脉长周期的计算。然后得 到每分钟的脉搏搏动次数〔即心率〕，并在数码管上显示心率，同时还设實了脉 搏测■仪的上下限报警电路。 关键词：脉搏信号，单片机，光电传感器，脉冲信号，便携式心率测试仪 城建学院本科毕业设汁〔论文〕Abstract 城建学院本科毕业设汁〔论文〕Abstract 可修编. 可修编. 城建学院本科毕业设汁〔论文〕Abstract 城建学院本科毕业设汁〔论文〕Abstract 可修编. 可修编. Abstract With the development of the biomedical engineering technology, the medical signal measuring instrument is changing everyday. Biomedical measurement and clinical medicine and health care increasingly close ties. We could better understand the phenomenon of human, life through various physiological signal detection of the human body. Pulse inclusions rich state of the health information, By using optical sensors, With the high development of electronics and puter nowadays, the pulse diagnosing technology should be objective and quantitive. this text access to the pulse signal design methods. This paper mainly introduces the concrete realization method for digital pulse counter, which uses photoelectric sensors to generate pulse signal. The pulse signal is amplified and regenerated to input into MCU to carry out corresponding control, as a result the pulse number per a minute is measured. The use of the pulse counter is quick and convenient. Through observing the pulse signal, human health can be inspected, it is usually used in health care centers and the hospitals. In my design. Portable heart rate measuring instrument based on MCU has a positive role in promoting the objective of the pulse technology. Key words: Pulse, MCU, Photoelectric Sensor9 Pulse Signal9 Portable 城建学院本科毕业设计〔论文〕 目录 城建学院本科毕业设计