4830-NCF PBT 台湾长春 物性表.pdf

CHANG CHUN PLASTICS CO., LTD. TH NO.301,SONGKIANG ROAD, 7 FL.,TAIPEI, 10477 TAIWAN TEL :886-2-2503-8131 (REF) FAX :886-2- 2501-8018 Engineering Plastics Polybutylene Terephthalate Technical Data CCP PBT 4830-NCF PBT glass fiber 30% reinforced injection moulding grade. Characteristics 1)excellent electrical property 2)excellent temperature resistance, high heat distortiontemperature. 3)excellent mechanic and chemical property 4)excellent weatherability 5)excellent wear property 6)excellent moldability 7)High resistance to fuels,oil,fats and many solvents Injection Moulding Condition Cylindertemperatures :240-270℃ Nozzle temperature :260-270℃ Mould temperature :40-120℃,suitable temperature 60-80℃ Injection rate : middle - fast Screw speed :60-120 rpm,to be chosen insuch away that plasticizing time isjust within cooling time. Pressure Injection pressure :500-1200 ㎏/㎝ 2 Holding pressure :300-800 ㎏/㎝ 2 Back pressure :0-3 ㎏/㎝ 2 Mould shrinkage Mould shrinkage 1.6 ㎜ thickness horizon is 0.2-0.5% and vertical is 0.8-1.4% under the test methodASTM D955. Packaging 25 ㎏/ paper bag . Material handing Moisture pick-upfrom ambient air should be avoided. Keep hopper properly closed. PBT 4830-NCF P.1/2 CHANG CHUN PLASTICS CO., LTD. TH NO.301,SONGKIANG ROAD, 7 FL.,TAIPEI, 10477 TAIWAN TEL :886-2-2503-8131 (REF) FAX :886-2- 2501-8018