《压铸制造工艺流程图》ppt模板课件.ppt

（Excellent handout training template） 压铸制造工艺流程图 General information Drawing Number MACHINED 2D 610741-CAT1 Version 4.2 3D 610741-C3D1 Part name Gear Keyless Annual Volume 517 K Alloy AZ91D DCM 300T Cavity : 2 Cavities (Die casting) Quoted Weight 0.109Kg Customer SBD Process plan 冲切 Trimming 检验 Inspection 去毛刺 Deburring 检验 Inspection 压铸 Casting 检验 Inspection 熔化 Melting 镁合金　 Ingot 检验 Inspection 化成 Chemical treat 检验 Inspection 包装 Packing 检验 Inspection Casting process flow chart 存储 Storage Die casting Casting process flow chart 工序号 Process 工序名称 Process 设备名称 Machine 辅助设备Fixture 控制项目 Control items 检测方法 Measurement OP10 熔炼/Melting 熔炼炉/ Melting furnace 镁合金成分，密度 Material composition ，consistency 光谱分析仪，密度计Spectrometer，densimeter OP20 压铸/Diecasting 300T 压铸机/300T Die casting machine 模具/special mold 1.形状 Profile 2.位置度、 Position, 3.尺寸公差 Dimension tolerance 1.轮廓仪 Pro 2.CMM 3. 塞规 Pin gauge OP30 冲切 / Trim 20T 油压机 20T oil pressure 专用切边模 Special Trim die 外观 Appearance 目视 Vvisual OP40 去毛刺 Deburr 去毛刺工作台 Deburring table 锉刀 、倒角刀 chamfer tool 外观 Appearance 目视 Visual Die casting tool layout 定模 fixed mold (Cover) 动模 Moving mold (Ejector) 滑块1 Slide 1 滑块2 Slide 2 Parting line Die casting tool layout 滑块2 Slide 2 滑块1 Slide 1 问题 Issue 位置 建议 Proposal 答复 Confirmation 1.图纸中29.5,29.74 尺寸标注不明确。 Dimension 29.5 and 29.74 are not clearly 2.3D 模型上红色圆圈内的孔有倒角，但实际模具无法做出这样的倒角，样品上也是没有倒角的。我们希望以样品为标准来生产。 The hold in the red circle showed on 3D mold has chamfer ,but this feature can’t be made by tooling, and the sample didn’t has the chamfer .So we would like produce as the sample Open issues list 3D mold Sample packing information details description length wideth height quantity weight box 450 400 200 48pcs/box 7