模具工序作业指导书.docVIP

第 PAGE \* Arabic 1 页 文件名称 File Name 模具工序作业指导书 Mold Process Operating Instructions 修改状态 Modifying Status 编制 Editing 审核 Audits 批准 Approval 实施日期 Implementation Date A/0 2013.03.15 操 作 规 程 Operation Rules and Regulations 准 备 Preparation 材料：毛巾 8#蜡 抛光机。 1.materials: towel,wax #8, polishing machine. 注意事项 Precautions 打开抛光机电源，确定机子是否处于正常状态。 2. Turn on power of polishing machine, check if it is working well. 模具表面打蜡一定要充足，要有6遍打蜡作业，每次间隔在2小时左右，看凝固情况。 1. Mold surface shall be adequately waxed,six times waxing shall be operated, intervals of time shall be around 2 hours as the solidification