内容讲义文稿教程讲稿skf lubrication management oil sampling.pptx

SKF Lubrication ManagementOil samplingPresented to: SKF Lubrication Management -Technical TrainingPresented by: SKF Maintenance Products16 – 20 April , 2012SKF BTP Nieuwegein, The Netherlands1Objectives and procedures ? SKF Group Slide Sampling objectivesIt is important to obtain a sample that is indicative of the whole systemWhen collecting an oil sample, information is required about one or more of the following items:Health of lubricant Lubricant contamination Condition and wear of machinery components ? SKF Group Slide Sampling proceduresWhile taking lubricant samples, follow proper sampling and sample handling techniquesUser should have written procedures to ensure that samples are taken consistently according to good maintenance practicesSamples to be taken in same manner each time to allow reliable trending, regardless of who collects the sampleExample of handbook showing sampling point location (Kimberley Clark/SKF Peru) ? SKF Group Slide Sampling proceduresMust Reflect Current Lubricant and Machine ConditionInclude details related to operating environment, oil changing records, and service repair recordsSample at a regular frequencyeg: diesel engine 150/250 operating hours, steam turbine 500 operating hoursFrequency can be varied due to such items as machine criticality, machine age (inc. overhauls, new machinery, near end of life), oil age (young 10% of life used/old) and fluid environment severity amongst othersBased on the goal of the sample. eg. Oil chemistry? Wear Debris? Contaminants? ? SKF Group Slide Sampling proceduresSample should:Maximise data densityMinimise data disturbanceTypical properties that need to be measured are:Cleanliness and dryness of lubricantAdditive depletionPresence of wear particles Ideal machine conditions for sampling are:Machine is in motionOil is circulatingAt normal operating temperature and conditions ? SKF Group Slide 2Sampling containers ? SKF Group Slide Sample containers...Samples should be taken in clean