培训第一天教程.pptxVIP

ICE Pre/Post: Recent Developments and Plans 18 June, 2014Shin Yokohama, Japan Gerald Schmidt;es-ice V4.22 3D Automatic Trimmed Meshing Simulation Summary Report Additions Excel Based Scripts for Process Automation Additional General Improvements Future Developments xMesh es-ice STAR-CCM+ for ICE ;3D Trimmed Meshing Automation;Initial steps;Initial steps;Initial steps;Automation details;Automation details;Completion;Generated from the Post-process panel A custom template can be applied Additional post quantities are included ;;Excel based automation scripts for several processes are embedded within es-ice They support only Linux, not Windows They are customizable for your computer system and simulation requirements They are available for closed cycle sector and full 3D modeling and simulation along with post processing animation and static image creation The following slides describe the sector automation script to provide a basic overview of the usage and functionality;Setup Automation - Excel Based Input Controls;Installations: Define installation paths. Mesh_settings: Define mesh type and sizes. Run_conditions: Initial and boundary conditions. Model_constants: Select combustion, NOx, soot models and constants. Run_controls: Indicate what parts of the setup process will be performed (meshing, pro-STAR setup, submit job). Injection_settings: Define orientation of injection and other nozzle parameters. Additional_es-ice: Allows user to specify additional commands to be executed by es-ice. Note that the additional commands will be executed at the end of the es-ice process (just before write data). Additional_pro-star: Allows user to specify additional commands to be executed by pro-STAR. Note that the additional commands will be executed at the end of the pro-STAR process (just before write prob file). ;Adjusting the Mesh SettingsCylinder, Events, Sector Parameters;Adjusting Run Conditions STAR Controls Initial and Boundary Conditions etc.;Adjusting Run Contro