汽车电动助力转向系统结构及其工作原理分析.docxVIP

— PAGE \* Arabic 1 — 汽车电动助力转向系统结构及其工作原理分析 本科毕业（设计）论文  （2012届）  题目汽车电动助力转向系统结构及其工作原理分析教学院系机械与交通学院专业车辆工程学生姓名  指导教师  评阅人  2012年6月3日  汽车电动助力转向系统结构及其工作原理分析   Electric power steering system structure and working principle  Abstract:In the course of development of the automobile, the steering system has gone through four stages of mechanical steering system, the development of hydraulic power steering system, electronically controlled hydraulic power steering system and electric power steering system. Electric power steering systems and traditional compared to the mechanical, hydraulic power steering system with steering sensitivity, low energy consumption, and environmental compatibility, low cost. In many high-end car is equipped with EPS, and therefore, the development of EPS has great practical significance and commercial value. The electric power steering system by the control part of the operative procedures of these three components, the control part of the signal acquisition circuit, micro-controller and signal transmission circuit. Where the micro-controller is the core component of the control section to send single-chip processing of the torque and speed signals collected by the signal acquisition circuit, micro-controller and then control signals to the signal transmission circuit through the drive circuit drive motor rotation. The executive part of the main motor, reducer, the composition of the bodies and the electromagnetic clutch. It plays a steering auxiliary power generation, transmission and interrupt the role. This paper analyzes the structure of the automotive electric power steering system, the working principle, fault repair, and its development trend of a systematic introduction to the automotive electric power steering system. Thus obtained, the electric power steering system, easy operation,  Key words: electric power steering SCM motor control。  目录  1 绪论 (1)  1.1 项目研究的目地及其意义 (1)  1.2