内容课件教案adams培训geometry.pptxVIP

SECTION 9GEOMETRY AND PRECISE POSITIONINGWhat is in this SectionBuilding GeometryConstruction Geometry PropertiesSolid GeometryPrecise Positioning: MoveBuilding GeometryProperties of geometryIt must belong to a part and moves with the part.It is used to add graphics to enhance the visualization of a part.It is not necessary for performing simulations.Locations and orientations are defined indirectly by parts using anchor markers.Note: If you move an anchor marker, all associated geometry moves with it. Conversely, anchor markers move when you move the associated geometry.Building Geometry (Cont.)Types of geometry in Adams/ViewConstruction geometryIncludes objects that have no mass (spline, arc, and so on).Is used to define other geometry.Solid geometryIncludes objects with mass (box, link, and so on).Can be based on construction geometry.Is used to automatically calculate mass properties for the parent part.Construction Geometry PropertiesMarker geometry hasAnchor marker, which is itselfParent: partOrientation and locationPoint geometry hasNo anchor markerParent: partLocationConstruction Geometry Properties (Cont.)Polyline geometry hasNo anchor markerParent: partOne line or multiple linesOpen or closedLength, vertex points, and angleArc geometry hasAnchor markerParent: partStart and end angle, radiusSpline geometry hasAnchor markerParent: partSegment count, open/closed, pointsSolid GeometryBlock geometry hasAnchor marker, which is the corner markerParent: partLength (x), height (y), depth (z) with respect to corner markerTorus geometry hasAnchor marker, which is the center markerParent: partRadius of ring (xy plane), radius of circular cross section ( to xy plane)Extrusion geometry hasAnchor marker, which is the reference markerParent: partOpen/closed profile, depth, forward/backwardsSolid Geometry (Cont.)Cylinder Geometry hasAnchor marker, which is the center marker (placed at first end)Parent: partLength (z), radiusPrecise Positioning: MoveTo move objects in Ada