焊接工艺规程(WPS)PQR.docx

Welding Procedure Specifications焊接工艺规程(WPS) Company Name 公司名称 江苏海光重工 WPS No. 编号 WPS-11001 版本号 Rev.0 Welding Process(es) 焊接方法 GMAW Type(s) 自动化程度 Semi-auto 半自动 Supporting PQR No. 依据工艺评定号 PQR-11001 Limitations 限制： This procedure is not qualified for Notch Toughness applications. 此规程不适用于具有冲击要求的焊接 JOINTS 接头 (QW-402) Joint Design: butt joint Or corner joint 接头型式: 对接或角接 Root Spacing (根部间隙) Details as drawing 详见图纸 Backing衬垫: yes √ no √ 有或无 Backing Material (Type): Weld metal or base metal 衬垫材料(型式): 焊缝金属或母材 ■Metal金属 □ Non-fusing Metal非熔金属 □ Nonmetallic非金属□ Other其它 □ Retainers 成型块 Sketches，Production Drawing, Weld Symbols, or Written Description should show the general arrangement of the parts to be welded. Where applicable, the details of weld groove may be specified. Details as drawing BASE METALS 母材 (QW-403) P-No.分类号 / Group No.组号 / to P-No.与分类号 / Group No.组号 / or或 Specification and type/ grade or UNS Number钢号和等级号为 GB/T 3274-2007 Q235 to Specification and type/ grade or UNS Number与钢号和等级号为 GB/T 3274-2007 Q235 or或 Chem. Analysis and Mech. Prop.化学成分和力学性能为 / to Chem. Analysis and Mech. Prop.与化学成分和力学性能为 / Base Metal Thickness Range母材厚度范围: Groove 坡口焊缝: 5-200mm Fillet 角焊缝: All 所有 Maximum pass thickness≤1/2in(13mm) (yes) √ (No) Other 其它: None FILLET METALS 填充金属 (QW-404) GMAW / Spec. No.(SFA) 标准号: NA AWS No(Class)分类号: NA F-No. 注1 A-No. 注1 Size of Filler Metals 填充金属尺寸: Φ1.0 mm，Φ1.2 mm Filler metal product form Solid Supplemental filler meta