西门子花式喷水池装置PLC控制程序的设计与调试.docxVIP

理工学院 课程设计说明书 设计题目：花式喷水池装置 PLC控制程序的设计与调试 学生姓名： 杨伟 学 号: 20142121070 专业班级：电子信息工程（1班 PAGE PAGE # 2017 年 5 月 27 日 Abstract Fancy fountain is a product of a kind of landscape architecture in recent years and fancy watch combination. The tourists and residents visit places, such as parks, squares, tourist attractions and some famous buildings, often built some fountains for people to relax, watch these fountains according to certain rule change water style. And with the programmable controller in Chinas rapid development, fancy fountain control requirements are increasingly high, making more and more control of the need to realize the programmable controller. The design of the book as the research object in the 4 ring fancy fountain, using SIEMENS S7-200 series programmable controller For the controller. The fountain control system overall function of fancy fountain is analyzed, detailed introduces the system hardware configuration, design and software design. The design of sequential function chart of the fountain system to improve quality control, and meet the requirements of real-time control. When the control requirements change. Only need to change the program, hardware wiring unchanged or smaller changes can be convenient and simple. And it adopts PLC control, with its small volume, strong function, high reliability, and has great flexibility and scalability characteristics, change in control or change the switch, you can change the water law, transform PLC is widely used in current industrial control 内容摘要 花式喷水池是近年来出现的一种园林建筑与花式观赏相结合的一 种产物。 在游人和居民光顾的场所，如公园、广场、旅游景点及一些知名 建筑前，经常会修建一些喷水池供人们休闲、观赏，这些喷水池 按一定的规律改变喷水式样。而且随着可编程控制器在我国的迅 速发展， 对花式喷泉的控制要求也越来越高， 使得越 来越多的控 制部分需要可编程控制器来实现。本设计书以 4 环花式喷水池为 研究对象， 采用了西门子 s7-200 系列可编程序控制器作为喷水池 的控制器。对花式喷水池的控制系统的总体功能进行了分析，详 细介绍了系统的硬件配置、设计方案及软件设计顺序功能图。本 设计改善了喷泉系统的控制品质，并真正地达到了实时控制的要 求。当控制要求发生改变时，只需要改变程序，硬件接线不变或 作较小变动即可，方便简单。而且采用 PLC控制时，利用体积小、 功能强、可靠性高，并具有较大的灵活性和可扩展性的特点，改 变控制方式或改变选择开关，即可改变喷水规律，变换出不同的 花样。 所以PLC在当前工业控制中得到广泛应用。 目 录 TOC \o