(贝克休斯的关于裸眼封隔器的材料).ppt

Openhole Packer MPas™ New Era Open Hole Packers MPas™ New Era Open Hole Packer Body Elastomer Packing Element Core Kevlar Reinforcement Braided Steel Structural Layer Deformable Back Up Rings Outer Elastomer Cover MPas™ Packer Design MPas™ Open Hole Packer Sequence Run-In Position Set Position Shifting Balance Sleeve (Initiating Setting) Shifting Balance Sleeve (Initiating Setting) MPas™ Open Hole Packer Sequence Run-In Position Set Position Run-In Position Shifting Balance Sleeve (Initiating Setting) Set Position MPas™ Open Hole Packer Sequence Size : 5-1/2” Maximum Packer O.D. : 8.03” / 8.075” Minimum ID : 4.592” – 4.802” Setting Mechanism: Hydrostatic Cylinder Collapse Rating: 10,700 psi (80ksi MYS) Mandrel Burst Rating: 8,400 psi (80ksi MYS) Mandrel Tensile Strength: 261,000 # (80ksi MYS) Setting Tool Required: Workstring Shifting Tool Maximum Ovality Tested (to date): 8-1/2” x 12” MPas™ Packer Specifications MPas™ Packer Specifications Size : 6-5/8” Maximum Packer O.D. : 9.125” Minimum ID : 5.696” Setting Mechanism: Hydrostatic Cylinder Collapse Rating: 5,000 psi (80ksi MYS) Mandrel Burst Rating: 5,700 psi (80ksi MYS) Mandrel Tensile Strength: 575,000 # (80ksi MYS) Setting Tool Required: Workstring Shifting Tool Maximum Ovality Tested (to date): 9-1/2” x 11” Size : 4-1/2” Maximum Packer O.D. : 5.625” Minimum ID : 3.8” Setting Mechanism: Hydrostatic / Hydraulic Tested w/ 4,100 psi Hydrostatic + 3,000 psi Hydraulic Setting Pressure Cylinder Collapse Rating: 7,500 psi (80ksi MYS) Mandrel Burst Rating: 8,440 psi (80ksi MYS) Mandrel Tensile Strength: 289,000 # (80ksi MYS) Setting Tool Required: Workstring Cup Tool Maximum Ovality Tested (to date): 6” x 7-1/2” MPas™ Packer Specifications Example Installation Sequence Example Installation Sequence Setting Tools SSC MAIC HB-1 Cup Tool Location : Timor Sea, AustraliaOperator : ConocoPhillipsField : Bayu UndanDate : 1st well May 2004# Wells : 3# MPas Packers : 26 (10, 8, 8)Max Deviation : 62 De