1.5万吨每日印染废水处理厂的初步设计.doc

. . - word.zl. 摘要 本次本科毕业设计的题目为1.5万吨/日印染厂废水处理工程初步设计，主要任务是完成该印染厂废水处理的平面布置、高程布置和各处理构筑物的初步设计。 初步设计需要完成设计说明书一份，污水处理厂平面布置图1、污水处理构筑物高程布置图1、单体构筑物图3。该印染厂废水排放规模为15000m3/d，进水水质为：CODcr=680mg/L，BOD5=140mg/L，SS=100mg/L，色度=150倍。 本次设计所选择的处理工艺是普通厌氧反响池+生物接触氧化法。因为它处理价格低，去除率高，出水水质好，微生物浓度高，污泥产量少，本设计由三局部组成：设计任务书，设计说明书，设计计算书。污水处理厂处理后的出水水质执行?纺织染整工业水污染物排放标准?〔GB4287-2012〕新建企业直接排放标准。 关键词：印染制品废水，普通厌氧反响池，生物接触氧化法 . . - word.zl. Abstract The graduation design topic for 15000 tons/day of dyeing wastewater treatment engineering preliminary design, the main task is to finish the dyeing waste water plane arrangement, vertical arrangement and the processing of the preliminary design of structures. A preliminary design to plete the design specification, sewage treatment plant floor plan and arrangement plan of the sewage disposal structure elevation for one piece respectively, Three monomer structure figures. This scale of dyeing wastewater discharge for 15000 m3 / d, and the feed water quality for: CODCr = 680 mg/L, BOD5 = 140 mg/L, SS = 100 mg/L, chromaticity = 150 times. This design choice of treatment process is mon anaerobic reaction tank + biological contact oxidation method. Because it deals with low price, high removal rate, good water quality, microbial concentration is high, less sludge production, this design consists of three parts: the design assignment, design specification, design calculation. After processing the waste water from sewage treatment plant, the water reached the new enterprise direct emissions standardthat is Discharge standards waterpollutants textileindustry (GB4287-2012) new build industry. Keyword: printing and dyeing products wastewater,mon anaerobic reaction pool, Biologic