年产360万吨烧结厂设计.docx

年产360万吨烧结厂设计摘要 钢铁工业的发展是衡量一个国家工业化水平高低的重要标志之一。烧结矿在高炉炼 铁生产中是很重要的一种含铁原料，它的质量好坏和产量的高低直接影响高炉的冶炼效 果。因此，设计一个合理的烧结工艺流程是非常重要的。 在整个设计过程中吸收了很多国内外先进厂家的经验和技术，根据所学的专业知 识，设计一座年产360万吨烧结厂。其技术指标为烧结机的烧结面积为350m2, R= 1.90, TFe=56.9%,成品矿粒度50-5 nun,转鼓指数≥75%,禾U用系数IBlt/nFh,作业率90.设。 本设计说明书中对所设计的烧结厂工艺进行了简要的介绍，并进行了配料计算、物 料平衡计算及主要设备选型计算，确定了含铁原料、熔剂、燃料等需要量，并选择了与 之相应的设备配置。全文分为：绪论；原料、熔剂和燃料；烧结厂生产能力工作制度及 产品方案；工艺流程及物料平衡计算；环境保护及综合利用五个部分。 本设计中，充分考虑了设备自动化控制及环境保护等方案的需要，选择了当前先进 的工业设备。在计算基础上又绘制了图纸说明并编写了设计说明书。 关键词：烧结厂设计；工艺流程;，设备选型，环境保护 Abstract The development of steel industry to measure a country,s industrialization is one of the important signs of horizontal discretion.In blast furnace ironmaking ,the sinter is an important primary iron material, the productivity and quality of the sinter have direct effect on blast furnace ironmaking. So, it is very important to design a sensible Singtering craft. In the whole design prossess, Some advanced experience and technology of domestic and foreign manufactures has adopted. According to the study of expertise, Design an annual production capacity of 3.6 million tons sinter plant. Technical indicators for the sintering area of its sintering machine is 350m2, R = 1.90, TFe = 56.9%, refined ore size 50-5 mm, drum index≥75%, the utilization factor 1.31t∕m2 ? h, the operating rate of 90.1%. The process of the sintering plant on the design were briefly introduced in this design specification, Ingredients calculation, material balance calculation, thermalbalance calculation and main equipment selection calculation , determine the Iron materials, flux, fuelrequirements, and selection of the corresponding fitness equipment configuration aredisplayed. The thesis is composed of five sections:introduction; material of iron ores, fluxes, flues; capacity, working rules and production program of the sinter plant; process and material balance calculation; environment protection and comprehensive utilization. The equipment autocontrd and environmental protection are fully conside